2 x RJ45 Network Splitter (TWIN PACK) – 1 x RJ45 (Male) to 2 x RJ45 (Female) Connections – ISDN – Interent – Ethernet – LAN – Twin pack because you need two of these to share an ethernet port

Posted by Notcot on Oct 3, 2010 in Handhelds & PDAs |

Average Rating: 5.0 / 5 (2 Reviews)

If you do not have enough spare ethernet ports on your wall sockets network, these adapters are for you. This splitter adapter will allow you to use two ethernet devices in one spare RJ45 wall socket female port, by splitting this port into 2. Attach either two computers, to an existing CAT5E Structured cabling system. Use a CAT5E UTP Cable Economiser to allow two ports to be on a to a single 8-core (4-pair) CAT5E UTP faceplate. Then use one at the other end to split the signal to two workstations. How they work: Two CAT5E cable economiser are required, one connected to a Patch Panel and another one The Cat5e Economiser, used in pairs (one at at each end of a cable run), allows 4 pair cable to be divided in two separate twisted pair data signal sockets.

  • Brand New RJ45 Network Splitter
  • RJ45 (Male) to 2 x RJ45 (Female) Connections
  • Share your network port between two devices
  • REMEMBER: You need to use this in pairs hence the twin pack offer
  • ALSO REMEMBER: Carefully read up on how to set these up successfully

2 x RJ45 Network Splitter (TWIN PACK) – 1 x RJ45 (Male) to 2 x RJ45 (Female) Connections – ISDN – Interent – Ethernet – LAN – Twin pack because you need two of these to share an ethernet port <- Read More

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

2 Comments

Ken Tolly
at 6:33 pm

Review by Ken Tolly for 2 x RJ45 Network Splitter (TWIN PACK) – 1 x RJ45 (Male) to 2 x RJ45 (Female) Connections – ISDN – Interent – Ethernet – LAN – Twin pack because you need two of these to share an ethernet port
Rating: (5 / 5)
Yes, two ethernet connections down one cable.

Can be used to bypass a failure if one of the critical wires in the cable has broken. One of the sockets uses wires 1,2,3 and 6; the other uses wires 4,5,7 and 8 so if, say, wire 6 is broken, the other socket will bypass this allowing a working connection along an otherwise broken cable.

Does what it says on the tin, though I don’t know if there is any compromise on speed.


 
Doug
at 6:55 pm

Review by Doug for 2 x RJ45 Network Splitter (TWIN PACK) – 1 x RJ45 (Male) to 2 x RJ45 (Female) Connections – ISDN – Interent – Ethernet – LAN – Twin pack because you need two of these to share an ethernet port
Rating: (5 / 5)
It does what it says on the tin. Delivered quickly and works as described. Be aware that the split connections will only support 100Mbit, not 1Gb as you need all 8 wires connected to support that.


 

Reply

Copyright © 2024 Notcot All rights reserved. Theme by Laptop Geek. Site by I Want This Website. | Privacy Policy.